12.4.2 Read motor (MR-3011)
[A] Disassembly
(1) Disconnect 2 connectors and take off the 2
binding band from read motor bracket.
(2) Remove 4 screws and take off the read motor with
the bracket attached.
(3) Loosen one belt tension screw. Remove 2 screws
and take the read motor apart from the bracket.
[B] Assembly and adjustment
(4) Attach the read motor to the bracket, and fix it
temporarily with 2 screws while holding the read
motor to the direction of the arrow.
(5) Attach the timing belt and hook on 2 springs.
October 2000 © TOSHIBA TEC
Binding
band
Read motor
Double-deck pulley
Timing belt
12-5
Connector
Belt tension screw
Spring
MR-3011/3012 DISASSEMBLY