Adjustment Of Height (Radf) - Toshiba MR-3011 Service Manual

12.16 Adjustment of height (RADF)

Make adjustment using the adjustment screws located at the right and left hinges so that the platen guide front
holder and platen guide rear holder contact with the ADF original glass, and the height positioning stud contacts
with the original glass.
Adjustment screw
October 2000 © TOSHIBA TEC
Platen guide front holder
Platen guide rear holder
ADF original glass
12-21
Adjustment screw
Height positioning stud
Original glass
MR-3011/3012 DISASSEMBLY