Empty Sensor, Registration Sensor, Original Width Sensor And Original Length Sensor - Toshiba MR-3011 Service Manual

12.6 Empty Sensor, Registration
Sensor, Original Width Sensor
and Original Length Sensor
(1) Open the jam access cover.
Remove 2 screws and take off the separation unit.
(2) Open the reverse guide and take it off upward
while pushing it to the direction of the arrow.
(3) Turn over the tray and remove 2 screws fixing the
feeder guide.
(4) Release the latches of the feeder guide and turn it
over.
(5) Disconnect the connectors and release the
latches.
Remove the registration sensor, original width
sensor and original length sensor.
October 2000 © TOSHIBA TEC
Latches
Original width sensor
Original width
sensor
Registration sensor
12-12
Reverse guide
Feeder guide
Empty sensor
Original length sensor
MR-3011/3012 DISASSEMBLY