12.7 Read Sensor
(1) Remove 2 screws and take off the sub cover.
(2) Remove one screw and disconnect one connec-
tor.
Take off the read sensor.
12.8 Exit Sensor
(1) Open the jam access cover and the reverse
guide.
(2) Remove one screw and take off the exit sensor
with the bracket attached.
(3) Disconnect the connector and release the latches.
Remove the exit sensor from the bracket.
October 2000 © TOSHIBA TEC
Connector
12-13
Sub cover
Reverse guide
MR-3011/3012 DISASSEMBLY