Displaying Indications - Siemens SIPROTEC 5 Manual

Which indications can be shown in the selected log depends on the assignments in the DIGSI 5 information
routing matrix or is predefined. You will find information about this in chapter
Setting Relative Time Reference
Reference the display of log entries, if needed, to the real time of a specific entry. In this way, you deter-
²
mine a relative time for all other indications. The real-time stamps of events remain unaffected.

Displaying Indications

8.4.4
Displayed indications are supplemented in DIGSI 5 and on the on-site operation panel with the following infor-
mation:
Table 8-1
Indications in
Log for operational indications and
log for user-defined indications
Log for fault indications
Log for motor-starting indications
Log for ground-fault indications
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
Overview of Additional Information
DIGSI 5 Information
Time stamp (date and time),
Relative time,
Entry number,
Function structure,
Name,
Value,
Quality,
Cause,
Number
Time stamp (date and time),
Relative time,
Fault number,
Entry number,
Function structure,
Name,
Value,
Quality,
Cause,
Number
Time stamp (date and time),
Motor-starting time,
Starting current,
Starting voltage,
Starting duration
Time stamp (date and time),
Relative time,
Fault number,
Entry number,
Function structure,
Name,
Value,
Indication number,
Quality,
Cause,
Number
Operation in the Operating State
8.4 Indications
8.5.1 General.
Device Display Information
Time stamp (date and time),
Function structure,
Name,
Value
Time stamp (date and time),
Fault number,
Value
Time stamp (date and time),
Function structure,
Name,
Value
Time stamp (date and time),
Fault number,
Value
149