General - Siemens SIPROTEC 5 Manual

Using On-Site Operation Panel

5.1 General

5.1 General
All SIPROTEC 5 devices can be operated via the DIGSI 5 interface of your PC and via the on-site operation
panel. This is available optionally as an integrated and detached on-site operation panel. The on-site operation
panel is characterized by a flat, compact design.
Variants
The on-site operation panel is composed of different modules depending on the hardware configuration of
the device. Operation is via the membrane keypad and the key switches. LEDs and displays in 2 different sizes
are available as elements of the display.
[dwosopva-040211-01.tif, 2, en_US]
Figure 5-1
Operating Concept
The operating concept allows you to do the following on-site operator control actions:
•
Navigation in the menu tree
•
Modification of settings
•
Resetting saved information
•
Showing default and control displays, measured values and logs
•
Executing switching operations
•
Initiating configured actions via function keys
•
Executing test and diagnostic functions
•
Status display with LED
74
Variants
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020