Offline Operation Using Digsi 5 - Siemens SIPROTEC 5 Manual

[scprohin-080916-01, 1, en_US]
Figure 8-3

Offline Operation Using DIGSI 5

8.3.3
Offline operation offers you the ability to carry out complete configurations and extensive parameterization of
a device. Once you have finished all settings, you can load the configuration from the DIGSI 5 PC to the device.
If the loading operation was successful, the device restarts automatically.
Typical Applications of Offline Configuration
Creating a configuration by selecting a suitable application template and subsequently adjusting the
²
settings to the individual conditions
Reusing a standardized configuration in multiple devices
²
Extensive changes in configurations and setting parameters
²
NOTE
i
i
For a device to be editable offline, you must first have created it in a project. After successful loading of the
configuration, the device restarts automatically.
Procedure
From the project tree, select the project containing the device to be operated.
²
Select the respective device within the project.
²
Open the device in the project tree.
²
You can now carry out configurations and settings in offline mode.
²
All the corresponding submenus are listed in the project tree under the device name.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-C, Edition 08.2020
Adding a Selected Device Configuration to a Project
Operation in the Operating State
8.3 Operation Options
143