Displaying Indications - Siemens SIPROTEC 5 V9.30 Manual

You will find additional information about deleting and saving logs in chapter
Logs.
Which indications can be shown in the selected log depends on the assignments in the DIGSI 5 information
routing matrix or is predefined. You will find information about this in chapter
Setting Relative Time Reference
Reference the display of log entries, if needed, to the real time of a specific entry. In this way, you deter-
²
mine a relative time for all other indications. The real-time stamps of events remain unaffected.

Displaying Indications

8.4.4
Displayed indications are supplemented in DIGSI 5 and on the on-site operation panel with the following infor-
mation:
Table 8-1
Indications in
Log for operational indications and
log for user-defined and switching-
device indications
Log for fault indications
Log for motor-starting indications
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
Overview of Additional Information
DIGSI 5 Information
Time stamp (date and time),
Relative time,
Entry number,
Function structure,
Name,
Value,
Quality,
Cause,
Number
Time stamp (date and time),
Relative time,
Fault number,
Entry number,
Function structure,
Name,
Value,
Quality,
Cause,
Number
Time stamp (date and time),
Motor-starting time,
Starting current,
Starting voltage,
Starting duration
Operation in the Operating State
8.4 Indications
8.5.13 Saving and Deleting the
8.5.1 General.
Device Display Information
Time stamp (date and time),
Function structure,
Name,
Value
Time stamp (date and time),
Fault number,
Value
Time stamp (date and time),
Function structure,
Name,
Value
165