Changing The Display; Setting The Auxiliary Data Field Display - Alpine IDA-X001 Owner's Manual

Changing the Display

Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or Sirius channel. The
unit can display this text information as explained below.
In XM or SIRIUS mode, press VIEW.
Each time you press this button, the display changes as shown below.
XM mode:
Channel No./Channel Name
Song title
Artist title
Category
Calendar/
Clock
SIRIUS mode:
Channel No./Channel Name
Song title
Artist title
Category
Channel No./Channel Name
Song title
Artist title
Composer
Channel No./Channel Name
Song title
Artist title
Category
1
* When ADF is turned OFF, this information is not displayed (see
"Setting the Auxiliary Data Field Display" on page 27).
• When the "Scroll Setting (Text Scroll)" (page 22) is set to "Auto," the
channel name and song title scrolls continuously. When the Scroll
Setting is set to "Manual," the channel name and song title scrolls
only once.
• Depending on the model, the display may differ from the one shown
above.
1
*
Auxiliary
Data Field
Channel No./Channel Name
Song title
Artist title
Category
Calendar/
Clock

Setting the Auxiliary Data Field Display

The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold FUNC./SETUP for at least 2
seconds to enter the Setup mode.
2
Turn the Center Jog Dial to select the XM mode,
and then press ENT.
3
Press ENT to select XM ADF.
4
Turn the Center Jog Dial to select On/Off, and then
press ENT.
When setting to On, Auxiliary Data Field is displayed by
pressing VIEW (Refer to the "Changing the Display" section
page 27.)
5
Press and hold BACK for 2 seconds to return to
normal mode.
• Pressing BACK during the procedure will return to the previous
mode.
27
-EN