Frequency Search Function; Receiving A Multicast Station; (Hd Radio Mode Only); Changing The Display (Hd Radio Mode Only) - Alpine iDA-X200 Quick Reference Manual

Frequency Search Function
You can search for a radio station by its frequency.
1
Press
~IENTER
in Radio mode to activate
Frequency search mode.
Changing the Display (HD Radio mode
only)
Press VIEW.
Every time VIEW is pressed changes the display.
2
Turn the Double Action encode' (iDA-X200 only)
or Rotary encode, (iDA-X300 only) to select the
desired frequency.
Band No.
Frequency
~
Station Song title
Station Call Letter'
~
Artist title
*
You can set a long or short HD Radio station name. Refer to "HD
Radio Station Call Setting" (page 25).
3 '
Press
~IENTER
to receive the selected frequency.
, Operation is not required during HD Radio reception.
, Press
~ in the search mode to cancel. Or, the search mode will be
canceled ifno operation is performed for 10 seconds.
Receiving a Multicast Station
(HD Radio mode only)
Multicasting which is the Ability to broadcast multiple program streams
over a single FM frequency thereby increasing the amount and diversity
of content choices. A maximum of eight multicast station channels can
be
selected on this unit.
1
When multicast station is received, the program
number is displayed, and <A> indicator lights UP.
r==
Program No.
j
-FM-1-2
I
88 . 8
2
Press FUNC./SETUP to display the Program Type
screen.
3
Turn the Double Action encode, (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select a
program, and press
~fENTER.
The selected program is received.
r==
Program No.
I
-F M---I1 - 3
I
8 8 . 8
Song title Calendar
~
Album title
~
Clock
Band No.
~
Frequency
Program Service example:
Multicast Radio Station Program No.
88.8 1
88.8 2
88.8 3
Program Service
MPS: Main Program Service
SPS: Sub-program Service
SPS: Sub-program Service
888
lO-EN
8
SPS: Sub-program Service