Setup; Bluetooth Setting; Setting The Bluetooth Connection; General Setting - Alpine IDA-X001 Owner's Manual

SETUP

You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from General Setting, Display Setting,
etc., to select your desired setting.
BAND ENT
BACK Center Jog Dial
A typical SETUP procedure is shown in steps 1 to 5 as
follows. See below for further information about each
SETUP menu.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Center Jog Dial to select the desired item,
and then press ENT.
Bluetooth General
*
HD Radio
(e.g. Select General)
* Only when HD / SAT receiver is connected.
3
Turn the Center Jog Dial to select a setting item,
and then press ENT.
(e.g. Select Beep)
Bluetooth:
Bluetooth IN
General:
Clock Mode Clock Adjust*
Time Play Mode Beep
2
CHG Name* AUX IN
Language Demo
Display:
Illumination Dimmer
BGV Select BGV Download
iPod:
Playlist Artist Album
Genre Composer
4
XM* :
XM ADF
4
SIRIUS* :
Game Alert
5
HD Radio* :
Station Call Digital Seek
1
* Refer to "Setting the Time and Calendar" (page 7).
2
* The setting can be made only when a changer is connected.
3
* The setting can be made only when AUX IN is set to ON.
4
* Displayed only when SAT radio receiver is connected.
For the SAT Radio Setting, refer to "SAT Radio Receiver (Optional)"
(page 23).
5
* Displayed only when HD Radio TUNER MODULE (TUA-T500 HD)
is connected.
20
-EN
FUNC./SETUP
*
Display iPod XM SIRIUS
1
Calendar Type Daylight
Int Mute Int Audio
3
AUX Name* P.IC
Dimmer Level Text Scroll
Podcast Audiobook
Song
4
Turn the Center Jog Dial to change the setting,
and then press ENT.
(e.g. Select Beep On or Beep Off.)
5
Press and hold BACK for 2 seconds to return to
normal mode.
• Pressing BACK during the procedure will return to the previous
mode.
• If the Center Jog Dial is turned 2 steps and held, you can change
items continuously.

Bluetooth Setting

Select Bluetooth from the setup main menu in step 2 above.
If an optional Bluetooth Box is connected, you can place a hands-free
call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth Box is connected and the
Bluetooth function is used. For details, refer to the Owner's Manual of
the optional Bluetooth Box.
• When Int Mute is set to On, the Bluetooth setting cannot be made.
When the Bluetooth box is connected, set Int Mute to Off. Refer to
"Turning Mute Mode On/Off (Int Mute)" (page 21).

Setting the Bluetooth Connection

Bluetooth IN Adapter / Bluetooth IN Off (Initial Setting)

General Setting

General is selected on the setup main menu in step 2.
*

Setting the Clock Display (Clock Mode)

24H Type / 12H Type (Initial setting)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Setting of Calendar Display Pattern Switching (Calendar
Type)
M/D/Y (Initial setting) / D/M/Y / Y/M/D
You can switch the calendar display pattern to be shown when the time
is displayed.
Y : shows the year
M : shows the month
D : shows the day
ex. M/D/Y Dec/31/2007

Setting Daylight Saving Time (Summer Time)

On / Off (Initial setting)
On: Turn Daylight Saving Time mode ON. The time
advances by one hour for areas observing Daylight
Saving Time.
Off: Return to the ordinary time.

Connecting an MP3 Changer (Play Mode)

CDDA (Initial setting) / CDDA & MP3
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
CDDA : Only CD data can be played back.
CDDA & MP3 : Both CD data and MP3 file tracks can be played
back.
• Change discs after performing this setting.