Specifications - Alpine IDA-X001 Owner's Manual

Specifications

FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
USB SECTION
USB requirements
Max. Power Consumption
USB Class
File System
MP3 Decoding
WMA Decoding
AAC Decoding
Number of Channels
Frequency Response*
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
* Frequency response may differ depending on the encoder
software/bit rate.
GENERAL
Power Requirement
Power Output
*Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
DETACHABLE FRONT PANEL SIZE
Width
Height
Depth
• Due to continuous product improvement, specifications and design
are subject to change without notice.
87.7-107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
530-1,710 kHz
22.5 µV/27 dB
USB 1.1/2.0
500mA
Mass Storage
FAT 12/16/32
MPEG-1/2 AUDIO Layer-3
Windows Media™ Audio
AAC-LC format ".m4a" file
2-Channel (Stereo)
5-20,000 Hz (±1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
14.4 V DC
(11-16 V allowable)
18 W RMS × 4*
1% THD+N
2 V/10 k ohms
1.0 kg (2 lbs. 3 oz)
178 mm (7")
50 mm (2")
156 mm (6-1/8")
170 mm (6-3/4")
46 mm (1-13/16")
24 mm (15/16")
107 mm (4-1/4")
46 mm (1-13/16")
30 mm (1-3/16")
31
-EN