Sound (Beep) Guide Function; Turning Mute Mode On/Off (Int Mute); Setting Tone Defeat For External Devices (Int Audio); Setting The Changer Name (Chg Name) - Alpine IDA-X001 Owner's Manual

Sound (Beep) Guide Function

Beep On (Initial setting) / Beep Off
This function will give audible feedback with varying tones depending
upon the button pressed.

Turning Mute Mode On/Off (Int Mute)

Int Mute On (Initial setting) / Int Mute Off
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When Bluetooth is set to Adapter, Int Mute cannot be set. Refer to
"Setting the Bluetooth Connection" (page 20).
• When the Bluetooth box is connected, set Int Mute to Off.

Setting Tone Defeat for External Devices (Int Audio)

Int Audio On / Int Audio Off (Initial setting)
When inputting external devices to this unit, turning tone defeat on will
bypass EQ and MX, i.e., sound for external devices is output at the
default setting.

Setting the Changer Name (CHG Name)

CHG (Initial setting)/PMD
When an optional changer is connected, you can set the displayed mode
name.
• The setting can be made only when a changer is connected. When
two changers are connected, the CHG1 Name/CHG2 Name is
displayed, and the setting can be made respectively.

Setting the AUX Mode (V-Link)

AUX IN On / AUX IN Off (Initial setting)
You can input TV/video sound by connecting an optional Versatile Link
Terminal (KCA-410C) to this component.
You can change the AUX name display when AUX IN is set to On.
When AUX IN is set to On, select the AUX Name mode by turning the
Center Jog Dial , then press ENT.
After that, turn the Center Jog Dial to select the desired AUX name,
then press ENT.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/
then press BAND to select your desired device.
Connecting to an External Amplifier (P.IC)
P.IC On (Initial setting) / P.IC Off
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to

Setting the Language Font

Language 1 (Initial Setting) / Language 2
to select AUX mode and
You can select between two types of language fonts.

Demonstration

Demo On / Demo Off (Initial setting)
This unit has a Demonstration feature for the display.
• To quit Demo mode, set to Demo OFF.
P.IC Off : Use this mode when the front and rear pre-
amplifiers of the unit are used to drive an external
amplifier connected to the speakers. In this setting,
the head unit's internal amplifier has no output to
drive speakers.
P.IC On : The speakers are driven by the built-in amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
OFF.
Language 1 : Normal Font
Language 2 : European Font
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left
21
-EN