Sat Radio Receiver (Optional); How To View The Display; Receiving Channels With The Sat Radio Receiver (Optional) - Alpine IDA-X001 Owner's Manual

SAT Radio Receiver
(Optional)
SOURCE/ ENT
BAND Center Jog Dial
BACK
/
/SEARCH
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is
connected via the Ai-NET bus, the following
operations may be performed. However, the XM
Receiver and SIRIUS Receiver cannot be
connected at the same time.
SIRIUS Receiver: Verify the features of the connected SIRIUS
Receiver Box. Not all SIRIUS Receivers have
identical functions and some may not be
performed on this unit. For details about individual
functions, refer to the SIRIUS Receiver's Owner's
Manual.

How to View the Display

<XM screen display example>
1
2
6
1 Mode display
2 Channel number
3 Radio station name
4 Song title
5 Artist title
6 Category name
7 Calendar/Time
FUNC./SETUP
VIEW
PRESET
3
4
5
7
<SIRIUS screen display example>
1
2
6
1 Mode display
2 Channel number
3 Radio station name
4 Song title
5 Artist title
6 Category name (Composer name)
7 Calendar/Time
Receiving Channels with the SAT Radio
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
100 digital audio channels. For a small monthly fee, subscribers can
hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite. For more information, visit XM's website at
www.xmradio.com, or SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will
be required. For details, consult you nearest Alpine dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the iDA-X001 are operative only when
a SAT Receiver is connected.
1
Press SOURCE/ to activate the SAT Radio mode.
2
Press BAND to select one of the three SAT Radio
Preset Bands.
Each press changes the band:
XM mode:
XM-1 XM-2 XM-3
SIRIUS mode:
SIRIUS-1 SIRIUS-2 SIRIUS-3
3
Press or to select the desired channel.
Holding down or
continuously.
• When using the optional remote control (RUE-4190, etc.), an SAT
Radio Channel can be directly called up with the numeric keypad of
the remote control.
1 While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press ENTER on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number has
been input.
3
4
5
7
XM-1
SIRIUS-1
will change channels
23
-EN