Setting Of Calendar Display Pattern Switching (Calendar); Setting The Clock Display (Clk Mode); Connecting An Mp3 Changer (Play Mode); Sound (Beep) Guide Function - Alpine iDA-X303 Quick Reference Manual

G~neral
setting
GENERAL is selected on the setup main menu in step 2.
Setting of Calendar Display Pattern Switching
(CALENDAR)
MIDIY (Initial setting) I Y/MID I DIMlY
You can switch the calendar display pallern to be shown when the ti me
is displayed.
Y : shows the year
M : shows the month
o :
shows the day
ex. M/Dty ~ 01/01/09
Setting the Clock Display (ClK MODE)
24H 112H (Initial setting)
You can select the clock display type, 12-hour or 24-hour. depending on
your preference.
Connecting an MP3 Changer (PLAY MODE)
CD-DA (Initial setting) I CD-DA&MP3
Perform this selling when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However. in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data. playback starts from the CD data
portion of the disc.
CD-DA : Only CD data can be played back.
CD-DA&MP3: Both CD data and MP3 file tracks can be played
back.
• Change discs after performing this setting.
Sound (Beep) Guide Function
BEEP ON (Initial setting) I BEEP OFF
This function will give audible feedback with varying tones depending
upon the bullon pressed.
Turning Mute Mode On/Off (INT MUTE)
INT MUTE ON liNT MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When Bluetooth is set to ADPT, INT MUTE cannot be set. Refer to
"Setting the Bluetooth Connection" (page
2/).
• When the Bluetooth INTERFACE (KCE-400BT) is connected, set INT
MUTE to OFF.
Setting the AUX+ Mode
AUX+ ON I AUX+ OFF (Initial setting)
You can input the audio of an external device, (such as a Portable audio
player) to the Bluetooth interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the Bluetuoth
interface connector as an AUX IN.
An external device and a Bluetooth INTERFACE (KCE-400BT) cannot
be connected at the same time.
AUX+ ON: Set to ON when an external device is connected. If
<!>
SOURCE is pressed and AUX+ is selected. the
sound of the external device is input to the unit.
AUX+ OFF: When set to OFF, AUX+ source cannot be selected.
22.EN
Setting the AUX+ NAME Mode
AUX (Initial setting) I TV I DVD I PORTABLE I GAME
You can change the AUX+ NAME when AUX+ is ON.
Setting the AUX Mode (V-link)
AUX ON I AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121 B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX NAME display when AUX is set to ON. Press
~/ENTER
when AUX is set to ON. and select AUX NAME by
turning the Double Action encoder, then press
~
/ENTER.
After that, turn the Double Action encoder to select the desired AUX
name.
If the KCA-4IOC is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
<!>
SOURCE
to
select AUX mode and
then press BAND to select your desired device.
Setting the Changer Name
CHANGER (Initial setting) I PORTABLE
When an optional changer is connected, you can set the displayed mode
name.
• The setting can be made only when a changer is connected. When
two changers are connected, the CHANGERI NAMEICHANGER2
NAME is displayed, and the setting can be made respectively.
Setting the External Digital Input (DIGITAL AUX)
DIGITAL AUX ON I DIGITAL AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set DIGITAL AUX to ON to enjoy 5. I-channel
surround sound.
You can change the D-AUX Name when DIGITAL AUX is set to ON.
Press
~/ENTER
when DIGITAL AUX is set to ON, and select
D-AUX NAME by turning Double Action encoder, then press
~/ENTER.
• Press
<!>
SOURCE. and select the D-AUX mode. and adjust the
volume. etc.
• After input selection is completed. turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.
Setting the AUX+ level (AUX IN GAIN)
LOW (Initial setting) I HI
After selling to ON in "Selling the AUX+ Mode", this selling can be
carried out.
LOW: Decreases the external input audio level.
HI : Increases the external input audio level.
Connecting to an External Amplifier (POWER IC)
ON (Initial settIng) I OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
POWER IC OFF: Use this mode when the front pre-amplifier of the
unit is used to drive an external amplifier
connected to the speakers. In this setting, the
head unit's internal amplifier has no output to
drive speakers.