About The Indicator Display; Setup; Setup Operation - Alpine iLX-507 Owner's Manual

About the Indicator Display

The Indicator Bar at the top of the screen displays various
types of information, like the current time.
Phone shortcut button
The Device List screen is displayed when a Phone,
CarPlay or Android Auto device is not connected.
The hands-free phone screen (Recent Call, Phone Book,
Keypad) is displayed when the hands-free phone is
connected. The screen of the previous logout is
displayed.
The Apple CarPlay screen is displayed while Apple
CarPlay is connected.
The Android Auto screen is displayed while Android
Auto is connected.
Lights up when connecting the hands-free
phone via Bluetooth. (Does not display when
connection is set to OFF.)
Indicates the battery level of the connected
hands-free phone .
No
Level 1 Level 2
Battery
• This may not be displayed for the hands-free phone .
Indicates the Bluetooth signal strength level of
the connected hands-free phone .
Displayed when Bluetooth setting is ON.
0 1
• This may not be displayed for the hands-free phone .
Lights up when connecting the audio device via
Bluetooth. (Does not display when connection is
set to OFF.)
Lights up when connecting the hands-free
phone
via Bluetooth. (Does not display when
connection is set to OFF.)
Lights up when connecting a separately sold
ALPINE KNOB (RUX-H02) via Bluetooth. You can
use the RUX-H02 to adjust the volume level and
sound quality (Bass Level, etc.) of this unit. For
details, refer to the Owner's Manual of RUX-H02.
Indicates the current time.
Touch to turn ON/OFF the clock display.
You can switch between the 12 hour display and 24 hour
display options (page 28).
14
-EN
Level 3 Level 4
2 3 4

Setup

Setup Operation

To display the Setup Menu screen:
Your vehicle must be parked with the ignition key in the
ACC or ON position. To do this, follow the procedures
below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Release the parking brake. (For safety, release the
parking brake while depressing the foot brake
pedal).
3 Engage the parking brake again.
• For automatic transmission vehicles, place the
transmission lever in the Park position.
Now, the locking system for the Setup operation has
been released. Engaging the parking brake can
reactivate the Setup Menu, as long as the car's ignition
has not been turned off. It is not necessary to repeat the
above procedure (1 through 3).
Each time the ignition is turned OFF, perform the above
procedure.
1
Press the
Level 5
The HOME screen is displayed.
5
2
Touch [Setup].
The Settings menu screen is displayed.
(HOME) button.
[Setup] button