Jonsered 6000+ Operator's Manual page 24

Two-stroke motor oil
• For best performance, use JONSERED two-
stroke motor oil, which has been specially
developed for Jonsered chain saw motors.
Mixing ratio: 1:50 (2%).
• If JONSERED two-stoke motor oil isn't available,
an another brand of high-quality two-stroke motor
oil intended for air-cooled engines may be used.
Get in touch with you local dealer when selecting
motor oil.
Mixing ratio: 1:33 (3%)-1:25 (4%).
• Never use two-stroke motor oil intended for water-
cooled outboard motors, so-called outboard motor
oil.
• Never use motor oil intended for four-stroke
engines.
Mixing
• Always mix oil and petrol in a clean container
which has been granted approval for petrol.
• Always begin by filling the container with half of
the amount of petrol to be mixed. Then fill the
entire quantity of oil required. Mix (shake) the fuel
mixture. Fill the remaining quantity of petrol.
• Mix (shake) the fuel mixture carefully before
filling the fuel tank of the saw.
• Do not mix more fuel than that required for
approx. 2 months of operation.
• If the saw is not used during a longer period of
time, the petrol tank should be emptied and
flushed out with petrol.
To fill the tank
1. Remove the fuel tank cap slowly to relieve
any overpressure.
2. Tighten the fuel tank cap carefully after filling
the fuel tank.
3. Wipe the surface clean around the fuel tank
cap.
Clean the fuel tank and the oil tank regularly. The
fuel filter should be changed at least once a year.
Any impurities, remaining in the tanks, will cause
breakdowns. Make sure that the fuel is
thoroughly mixed by shaking the container
before filling the tank.
24
English
HANDLING FUEL
Gasolin
Oil • Öl
Benzin
Huile • Aceite
Essence
Lit.
Gasolina
2%(1:50) 3%(1:33)
Lit.
0,10 0,15
5
0,20 0,30
10
0,30 0,45
15
0,40 0,60
20
US
US
gallon
fl. oz.
2%(1:50) 3%(1:33)
2 1/2 3 3/4
1
6 1/2 9 3/4
2 1/2
12 7/8 19 1/4
5
4%(1:25)
0,20
0,40
0,60
0,80
4%(1:25)
5 1/8
12 7/8
25 3/4