Jonsered 6000+ Operator's Manual page 11

Steering handle (17)
The saw carriage can be controlled and steered
forward by means of the steering handle located
on the left-hand section of the carriage.
The steering handle is equipped with the
following controls:
18 Brake handle
19 Throttle stop
20 Throttle control
21 Stop control (emergency stop)
Saw blade wheel (28)
The saw blade runs across blade wheels, made
of cast aluminium and balanced for smooth
running. The saw blade wheels have bearings,
and are adjustable for tensioning and aligning
the saw blade.
The saw blade wheels are equipped with
scrapers, which prevent sawdust and the like
from collecting between the saw blade and the
blade wheels.
One of the saw blade wheels is driven across an
adjustable drive belt by the motor.
Saw blade (13) and blade guide
(12)
Two saw blade guides keep the saw blade
correctly positioned on the saw blade wheels
while the saw is in operation.
One of the saw blade guides is located in front of
the belt-driven saw blade wheel and ensures
correct blade entry onto the wheel.
The other saw blade guide is moveable and is
located above the the blade before it enters the
log. This guide absorbs the forces from the log
and prevents the blade from twisting.
DESCRIPTION
28
21
20
19
18 17
13
12
28
11
English