Jonsered 6000+ Operator's Manual page 15

DESCRIPTION
Rail stops
A
The rails have two rail stops (A) at each end. The
stops consist of bolts secured in the rails.
Rail guards (14)
14
The saw carriage is equipped with four rail
guards which run over the rail. The rail guards
are de-signed to keep the rail clean and prevent
squeeze injuries between wheel and rail.
Chain guard (3)
The chain which unites the two threaded height-
adjustment rods is equipped with a guard in the
3
form of a plastic cowl, which is secured by two
screws.
Stop control (21)
A stop control is fitted on the right-hand handle.
21
This control also functions as an emergency
stopping device.
15
English