Jonsered 6000+ Operator's Manual page 16

Grinding device
42
41
40
43
The grinding device consists of the following
components:
• A fixed section.
• Grinding motor.
• Forward feed device.
The fixed section contains a motor for forward
feed of the saw blade and three foldable support
arms which form a stable platform for setting up
the grinding device. The support arms also guide
the saw blade while grinding is carried out.
The section with moving parts consists of a
motor, grinding disc and arms that secure its
position. The section withmoving parts can be
adjusted for grinding three different side plate
angles: 11°, 15° and 19°.
The forward feed device consists of a cam and
levers. The cam is driven by the forward feed
motor in the fixed section. The cam influences
two levers which both feed the saw blade for-
ward and lower and raise the grinding disc during
the grinding operation.
16
English
DESCRIPTION
46
44
45
40. Fixed section.
41. Forward feed device.
42. Grinding motor.
43. Adjusting knob for forward feed position.
44. Starting switch for forward feed device.
45. Starting switch for grinding disc.
46. Adjusting knob (grinding depth).
47. Locking knob (side plate angle).
48. Pin for locking the side plate angle.
47
48