Error Light Troubleshooting Codes - Visioneer PATRIOT P90 User Manual

M
AINTENANCE

Error Light Troubleshooting Codes

Normal Operation
n Steady blue: indicates the scanner is ready to scan.
Slow flashing blue: indicates the scanner is in low power mode.
n
Rapid flashing blue: indicates the scanner is waking up from low power mode.
n
Steady red: the scanner is busy or it is not connected to the computer.
n
Flashing red: the scanner is reporting an error.
n
Error Codes
If an error occurs during scanning, the LCD will display an error code. The following table lists the codes,
messages, and common solutions.
In all cases, you should turn off the scanner and check the scanner setup. Make sure the USB cable is plugged into
the scanner and computer. Make sure the power cord is plugged into the scanner and into a wall outlet. Contact
Visioneer Technical Support if you experience a different blinking pattern.
S U ' G
CANNER SER S UIDE
V P P90
® TM
ISIONEER ATRIOT
51