Installing The Scanner Driver - Visioneer PATRIOT P90 User Manual

I
NSTALLATION
10. If a version of the software is already installed on the system, the option will be greyed out. However, if there
is a newer version available, it will be possible to download and install.
11. The software will have to first be downloaded by clicking Download. The total size of the download is shown
at the bottom.
12. After the download has begun, it can be paused. If changes to the selections are required, it is necessary to
click Reset while the download is paused. This will allow the settings to be changed.
Note: Clicking the Reset button in either the Main menu or the Install menu will cause both partially completed
and previously downloaded files to be deleted. In order to be installed they will have to be downloaded again.
13. Once all software has been downloaded, click Install.

Installing the Scanner Driver

The scanner driver installation will start first.
1. The Welcome screen for the scanner driver Setup Wizard opens. Click Next.
Note: there may be an option in the installation window to remove any current scanning profiles. You will see
this prompt if you already have a previous version of the scanner driver installed. Select the option in the
installation window only if you want the existing profiles
2. On the License Agreement window, read the license agreement. If you accept the terms, select I Agree then
click Next.
If you choose not to accept the license agreement, click Cancel. Click Close on the Installation Interrupted
window.
3. The software will now be installed.
S U ' G
CANNER SER S UIDE
V
ISIONEER
.
P P90
® TM
ATRIOT
15