Visioneer PATRIOT P90 User Manual page 37

M
AINTENANCE
Note: When cleaning the rollers, do not rub the roller cleaning paper vigorously back and forth across the roller,
this will shred the roller cleaning paper and leave debris in the scanner.
Safety Precautions
n Keep the roller cleaning paper away from fire, heaters or any open flame or heat source as any form of alcohol
is flammable.
n Wear protective gloves as the roller cleaning paper may irritate sensitive skin.
n Only clean the rollers and scanning areas, as described in this section, with the roller cleaning paper.
n Do not leave the roller cleaning paper or any of the cleaning supplies where children can access them.
n Always turn off the scanner and unplug the scanner's power and USB cable prior to using the roller cleaning
paper.
Preparation
n Roller cleaning papers can be purchased from our website at
page for your scanner.
n When cleaning the inside of the scanner, you should clean all of the rollers, scanner glass and background
plates at the same time.
n Use scissors to open the roller cleaning paper bag, cutting across the dotted line.
Caution: The roller cleaning paper is moistened with isopropyl rubbing alcohol. Please read and
follow these precautions to ensure your safety.
Cleaning the ADF Rollers
When you perform cleaning for the rollers in the lower part of the scanner, the rollers need to be rotated with a
light force. Using the Clean Mode, the rollers can be automatically rotated to help cleaning easier and effective.
1. Hold the Simplex and Duplex buttons for more than two seconds to access the LCD scanner menu.
2. Use the up and down arrows to select Clean mode.
3. Use the Duplex button to confirm your selection.
S U ' G
CANNER SER S UIDE
V
ISIONEER
www.visioneer.com in the Parts & Accessories
P P90
® TM
ATRIOT
37