Visioneer PATRIOT P90 User Manual page 33

M
AINTENANCE
2. Use the up and down arrows to select the Scanner Details option.
3. Use the Duplex button to confirm your selection.
4. You can now view the scanner details: model name, firmware version, serial number.
5. To view software details, use the down arrow, as indicated on the LCD menu. The LCD will display: driver
version, Acuity version number as well as One Touch version number.
Scanner configuration
n Counters—click the reset button next to the counter you want to set back to 0.
To view the counters from the LCD Scanner Menu:
1. Hold the Simplex and Duplex buttons for more than two seconds to access the LCD scanner menu.
2. Use the up and down arrows to select the Counters option.
3. Use the Duplex button to confirm your selection.
4. You can now view the counters.
Power Settings
Some features described herein may not be available for the current scanner.
n Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can adjust the amount
of time you want the scanner to wait before it goes into low power.
Click the green enter button to save any changes in the Sleep mode field.
Click the red reset button to reset to the default timeout value.
n Power off—input the number of minutes you want the scanner to wait before it turns itself off.
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
Firmware update
Check for update—check the scanner's firmware version against the version included with the scanner
n
driver. When the scanner is connected to the computer and this option is selected, or when a different
scanner of the same model is connected, a notification will show indicating that the firmware version is out of
date. Deselect this option to stop being notified of the different version if you do not want to update the
firmware.
Update—click this button to update the scanner's firmware with the latest revision provided in the driver
n
installer. Follow the instructions on-screen to update the scanner's firmware. Do not turn off the scanner or
close any on-screen dialogues while the firmware update is in process. Turning off the scanner or closing any
on-screen dialogues before you are prompted could irrevocably damage the scanner and prevent it from
working. The firmware update software will prompt you when it is safe to power cycle the scanner.
S U ' G
CANNER SER S UIDE
V P P90
® TM
ISIONEER ATRIOT
33