Reset Controllers A – D; Controller Pedal 1 And 2 Assignment - Alesis S4 Plus Reference Manual

Reset Controllers A – D
Found on Global Edit Page 4, the "A–D Reset" function (On/Off) determines whether
the values for Controllers A–D will be reset to zero when a new Program or Mix is
recalled. Use Quad Knob [2] to turn this on or off.
Example: If you adjusted Controller A (using Quad Knob [1]) to, say, a value of 25
and then you recalled a different Program, the value of Controller A would remain at
25 if the "A–D Reset" function was turned off. Alternatively, the Controller A value
would reset to 0 if this function was turned on.

Controller Pedal 1 and 2 Assignment

Like the MIDI Controllers A—D, the two footpedal controls (Pedal 1 and Pedal 2) are
assigned to a MIDI controller. In Page 5 of Global Edit mode, you can assign which
MIDI controllers (0 to 120) determine what Pedal 1 and Pedal 2 will be received as.
These controllers are effectively the same as Controllers A-D, except they have no
local control. Quad Knob [1] selects the controller for Pedal 1, while Quad Knob [3]
selects the controller for Pedal 2. The default settings are: Pedal 1 = 7; Pedal 2 = 4.
S4 Plus Reference Manual
Global Settings: Chapter 8
113