Table of Contents
Advertisement
To audition Programs before overwriting them with STORE
...when editing a Program in Mix Edit Mode:
¿
While in Mix Program Edit mode, press [PROGRAM].
This selects Program Play Mode, retaining your edits to the Program in Mix Edit.
¡
Press the BANK [¨] button until the word "USER" appears in the top part of the
display, just before the Program name. If a RAM card is inserted, use the BANK
buttons to select a Card Bank.
¬
Use the VALUE [Æ] and [¨] buttons to scroll through the Programs until you find
one you wish to overwrite with the new edited Program. Take note of the number.
÷
Press [MIX].
This recalls the edit buffer in Mix Mode, which contains your edited Program.
ƒ
Press [SELECT] twice, until "EDITING: PROGRAM" appears under the MIX
number in the display.
ª
Press [STORE].
The top line of the display will read "STORE PRG UsrXXX?" where XXX is a
User Program number from 000—127.
D
Use Quad Knob [2] to select the Program number you noted in step 3. If
necessary, use Quad Knob [1] to select a Card Bank.
«
Press [STORE] again.
The Program is now stored.
At this point your edited Program is stored, however the Mix you were auditioning
before storing the Program still has the old Program number assigned (if the edited
Program was saved to a different Program number location). Therefore, you need to
re-select the new Program number from within Mix Edit mode.
»
Press [MIX], then [SELECT] to access Mix Edit mode.
...
Use the MIDI [¨] and [Æ] buttons to select the MIDI channel you want, and use
the VALUE [Æ] and [¨] buttons or Quad Knob [2] to select the Program number. If
necessary, use Quad Knob [1] to select the Bank.
S4 Plus Reference Manual
Overview: Chapter 4
35
Advertisement
Table of Contents
