Table of Contents
Advertisement
Chapter 4: Overview
To Audition Programs Before Storing
To look for available memory locations to permanently store your Program to, you
can move between Program Mode and Mix Mode without losing your changes. This
is because Program Mode has a Program edit buffer, and Mix Mode has its own Mix
edit buffer along with 16 Program edit buffers. These buffers are retained when
moving between Program Mode and Mix Mode, thus making it easy to search for a
suitable location to store your newly created Program. Example: While in Program
Edit mode, go to Mix Mode and scroll through the Program list on one of the
Channels; while editing a Program from Mix Mode, go to Program Mode to scroll
through the Program list.
The way to tell the difference between a program edited in Program Mode and one
edited from Mix Mode is simple: in Program Mode, the MIX number does not appear
in the display.
You will lose your changes if you remain in the same mode and recall a different
J
Mix/Program by pressing the MIX/PROGRAM SELECT [1]—[0] buttons.
To audition Programs before overwriting them with STORE
...when editing a Program in Program Mode:
¿
While in Program Edit mode, press [MIX].
This selects Mix Play Mode, retaining your edits to the Program in an edit buffer.
¡
Using the BANK and DIRECT SELECT buttons, select Mix 99 in Preset Bank 1.
¬
Press [SELECT] to enter Mix Edit Mode, and press both MIDI [¨] and [Æ] buttons
simultaneously to select Channel 1.
÷
Press both FUNCTION [¨] and [Æ] buttons simultaneously so the words
"PROGRAM – ASSIGN" are underlined.
ƒ
Turn Quad Knob [1] to the left so that the word "USER" appears in the top part of
the display, just before the Program name. If a RAM card is inserted, use Quad
Knob [1] to select a Card Bank.
ª
Turn Quad Knob [2] to scroll through the Programs until you find one you wish to
overwrite with the new edited Program. Take a note of the number.
D
Press [PROGRAM] to enter Program Play Mode.
This recalls the edit buffer in Program Mode, which is your edited Program.
«
Press [STORE].
The top right of the display will read "STORE PRG UsrXXX?" where XXX is a
User Program number from 000—127.
»
Use Quad Knob [2] to enter the Program number you noted in step 6. If
necessary, use Quad Knob [1] to select a Card Bank.
...
Press [STORE] again.
The Program is now stored.
34
S4 Plus Reference Manual
Advertisement
Table of Contents
