Table of Contents
Advertisement
Chapter 9: MIDI Transfer and Storage Operations
To send the entire User bank via MIDI:
¿
Connect a MIDI cable from the S4 Plus's MIDI Out to the MIDI In of a device
capable of receiving the data (another S4 Plus, etc.).
¡
Press [STORE].
¬
Use either PAGE [¨] or [Æ] to select Page 3 of the Store function.
÷
Turn Quad Knob [1] to the right until the upper right display reads "SEND_ALL
TO MIDI."
ƒ
Press [STORE] to transmit the data out the MIDI Out connector.
To send a single Program via MIDI:
¿
Follow steps
¡
Use Quad Knob [1] to select a Program. You may select any Program in the User
bank (0 to 127) or the Program Edit buffer (EDIT) or any of the 16 Mix Edit
buffers (EDm01 to EDm16).
As this value is changed, the second parameter (destination) will be linked. This
is because most often you will want to transmit a Program to the same Program
location. The only time to do otherwise is when sending to another S4 Plus (see
below).
¬
Press [STORE] to transmit the data out the MIDI Out connector.
To send a single Program via MIDI to a different Program number:
¿
Follow steps
¡
Use Quad Knob [1] to select a Program. You may select any Program in the User
bank (0 to 127) or the Program Edit buffer (EDIT) or any of the 16 Mix Edit
buffers (EDm01 to EDm16).
As this value is changed, the second parameter (destination) will be linked.
¬
Use Quad Knob [2] to select a Program number to send the selected Program to.
If this value is turned all the way up, the "SEND ALL TO MIDI" option will be
selected and the first value will jump all the way up. At this point you will not be
able to adjust the destination value with Quad Knob [2] until you use Quad Knob
[1] to re-select the Program to be transmitted.
÷
Press [STORE] to transmit the data out the MIDI Out connector.
The procedure is similar for sending Mixes. Page 4 of the Store function allows you to
send any one of the Mixes.
Similarly, if a Mix is stored, you may want to store each of the Programs used in the
Mix. The "SEND ALL TO MIDI" command in the Program Store function is an easy
shortcut to this.
120
¿
¬
through
in the instructions above.
¿
¬
through
in the instructions above.
S4 Plus Reference Manual
Advertisement
Table of Contents
