Table of Contents
Advertisement
Copying Effects Between Programs
Follow the steps below to copy the Effects from one Program to another Program in
the User Bank.
¿
Press [PROGRAM] to select Program Play Mode.
¡
Use the VALUE [¨] and [Æ] buttons to select the Program Number that uses the
Effects you want to copy. If necessary, use the FUNCTION [¨] and [Æ] buttons to
select a different Bank.
¬
Press [STORE].
÷
Press PAGE [Æ] once to advance to Page 2.
The top right section of the display will read " COPY TO SOUND 1".
ƒ
Turn Quad Knob [1] clockwise until the display reads "COPY FROM EFFECT".
This selects the Effects of the currently selected Program as the source of what
is to be copied.
ª
Turn Quad Knob [2] to select the Program Number in the User Bank you wish to
copy the Effects to (000–127).
D
Press [STORE] to complete the copy function.
Store an Effect
If you have edited a Program's Effect and would like to store it without storing the
changes you've made to the Program's parameters, you can use the Copy Effect
function to store only the Effects edits to the currently selected Program. When you
recall this Program, it will have the new Effects settings you saved it with, but will
retain its previously stored Program parameter settings.
Store a Mix
¿
While in either Mix Play Mode or Mix Edit mode, after making your edits press the
[STORE] button.
¡
Select the memory Bank and location to which you want to store the Mix using
Quad Knob [1] and [2]. respectively.
If no RAM Card is inserted, you will only be able to select the User Bank.
Do not use the DIRECT SELECT [1]—[0] buttons. Doing so will result in recalling a
J
different Mix and you will lose your changes.
¬
Press [STORE] again to complete the operation.
Storing a Mix only stores the Mix parameters, not the individual Programs or Effect
J
Patch used in the Mix. If you have edited any of the Programs in the Mix or the
Effects Patch, you must store them separately.
S4 Plus Reference Manual
Overview: Chapter 4
33
Advertisement
Table of Contents
