Table of Contents
Advertisement
Chapter 6: Editing Programs
To re-initialize the S4 Plus:
¿
Press [PROGRAM] to enter Program mode.
¡
Turn the unit off.
¬
While holding down both Quad Buttons [1] and [4], turn on the power.
The S4 Plus will come on showing Program 00, with the EDITED flag showing in the
display. This is the Program Mode edit buffer, set to the default settings. Re-
initializing will also reset all Global parameters to their default settings, and will
initialize all edit buffers so that all Mix and Program parameters are reset to their
default settings. However, none of the Programs or Mixes are changed when re-
initializing the unit. You can proceed to edit, then [STORE] at any Program location
you like.
84
S4 Plus Reference Manual
Advertisement
Table of Contents
