Alesis S4 Plus Reference Manual page 91

Chapter 7: Editing Effects
Configuration #1: 4-Sends, 1 Reverb
AUX LEFT
AUX RIGHT
MAIN LEFT
MAIN RIGHT
FX SEND 1
FX SEND 2
FX SEND 3
FX SEND 4
Pitch 1
Mono chorus
Stereo chorus
Mono flange
Stereo flange
Pitch detune
Resonator
Pitch 2
Mono chorus
Stereo chorus
Mono flange
Stereo flange
Pitch detune
Resonator
Pitch 3
Resonator
Think of the diagram as a "road map" showing all possible paths from the starting
points (FX SEND 1 through 4) to the ultimate destinations (MAIN LEFT and MAIN
RIGHT at the top of the page). The dotted lines indicate the divisions between
different functional blocks, and the solid lines indicate signal paths between the
blocks and controls. The diagram is similar to a block diagram for a mixer, with signal
moving generally from the left to the right. The number next to each function name
represents one of the four effect sends. For example, Delay 2 refers to the Delay
effect on effect send 2.
90
1 2 3
BAL.
PITCH 1
DELAY 1
PITCH 1 DELAY 1
BAL.
PITCH 2
DELAY 2
PITCH 2 DELAY 2
BAL.
PITCH 3
DELAY 3
PITCH 3 DELAY 3
DELAY 4
DELAY 4
Delay 1
Mono delay
Stereo delay
Ping-pong delay
Delay 2
Mono delay
Stereo delay
Ping-pong delay
Delay 3
Mono delay
Delay 4
Mono delay
1 2 3 4 MIX
BAL.
1
AMP
2
REVERB 1
BAL.
1
AMP
2
REVERB 2
BAL.
1
AMP
2
REVERB 3
BAL.
1
AMP
2
REVERB 4
Reverb 1
Plate 1
Plate 2
Room
Hall
Large
Gate
Reverse
Reverb 2
Balance and level to Reverb 1
Reverb 3
Balance and level to Reverb 1
Reverb 4
Send/delay mix and level to
Reverb 1
S4 Plus Reference Manual
AUX LEFT
AUX RIGHT
MAIN LEFT
MAIN RIGHT
1
REVERB