Using ML-PPP and PPP Connections in
Windows NT
Use the following steps for setting up ML-PPP and PPP for local and
long distance calls.
To input ML-PPP and PPP AT commands:
1.
Open Modems under the Control Panel. Under Modem
Properties select the TA/V.34 Internal (PnP) or TA Internal
(PnP).
2.
Click Properties.
3.
Under the Connection tab click Advanced. Under Extra Settings:
For PPP type:
For ML-PPP type:
4.
Click OK and close out of Modem Properties.
32
%A2=5%B39 S7=55
%A2=6%B39 S7=55
TA/V.34 and TA Owner' s Manual