Or Ta Hardware - Zoom ISDN TA/V.34 Owner's Manual

•
You may also have received an optional standard voice handset
with connecting cord.
To use the TA/V.34 or TA, you also need the following:
•
An ISDN line connection (typically, a wall-mounted telephone
jack or socket or an NT1 device). Up to eight S/T devices can be
connected to an NT1 device. You may have other equipment
connected, such as a digital telephone.
•
A 486 or faster computer with an available full-size IBM PC-
compatible 16-bit ISA slot, 8 MB RAM, a 3.5" disk drive, a CD-
ROM drive, a hard drive with at least 12 MB available, and
Microsoft Windows 3.1, 3.11, Windows 95, or Windows NT (NT
version 4.0 or higher with a Plug and Play BIOS). A mouse is
recommended.
•
A tool, if necessary, for removing and putting back the computer
cover. (See your computer's manual.)
Installing the TA/V.34 or TA Hardware
1. Turn off and unplug your computer. Do not plug it back in or
turn it on until you finish the installation.
2. Carefully take the cover off your computer. If you need help,
refer to your computer's manual.
3. Touch a metal surface to discharge static electricity. Static
electricity can damage computer and modem components.
4. Determine whether you must provide termination on your
TA/V.34 or TA. Consult your telephone company or ISDN
installer to determine whether you will need to provide
termination on your ISDN board.
Your TA/V.34 or TA board is shipped without terminating
resistance. However, the board has small connectors, called
jumpers, that can be moved to activate resistance circuitry.
In the great majority of cases, you will not need to change the
jumper settings, and you can skip to step 5 below.
If you determine that your TA/V.34 or TA must provide
12 TA/V.34 and TA Owner' s Manual