Swann AMI Deltacon Power Operator's Manual page 32

AMI Deltacon Power
Instrument Setup
Calculations
Measuring unit
Monitoring of
cation ex-
changer resin
Display
External
devices
Limits Alarms
32
Menu 5.1.1.1
Set <Calculations> to "Yes" if you want to have pH and alkalization
agent calculated and displayed.
Menu 5.1.1.2
Set the <Measuring unit> according to your requirements:
 S/cm
 S/m
Menu 5.1.1.3
Set <Monitoring of resin> to "Yes" if you want to monitor the capacity
of the cation exchanger resin.
Menu 4.4.1, Screen 1
Menu 4.4.2, Screen 2
Program display screens according to your requirements, see pro-
gram list and explanations
Program all parameters for external devices (interface, recorders,
etc.) See program list and explanations
4.2 Relay Contacts, p.
Program all parameters for instrument operation (limits, alarms). See
program list and explanations
4.4 Display, p.
5.2 Signal Outputs, p. 63
60.
4.2 Relay Contacts, p.
61.
60.
A-96.250.451 / 190121
and