Chapter 4: Basic Operations
E
DITING
56
I
NDIVIDUAL
You can also select a specific digit in the display to edit, by holding the
[EDIT VALUE] button and pressing either [ ] or [ ]; the currently
selected digit will flash. While still holding the [EDIT VALUE]
button you may press any of the [LOCATE 0] – [LOCATE 9] buttons to
enter a specific numerical value for the currently selected digit. The
selected digit will replace the previous once and will stop flashing,
and the next digit to its right will be selected (flashing) so you may
continue entering digits using the [LOCATE 0] – [LOCATE 9] buttons.
D
IGITS
ADAT XT20 Reference Manual