Applications: Chapter 6
the other tracks. When the tape comes back, just pop it into one of your
machines, and your partner's parts will be in sync with the original tracks you
laid down.
You may wish to include documentation with your tape which indicates the
Track Delays values, Tape Offset amount and/or Locate Point positions, so your
partner can recreate the same parameter settings you were using. Or, if you're
both using BRC remotes, save your setup to the "data" section of tape (this is
called saving the Table of Contents, or TOC). This way, you partner can pick up
right where you left off.
ADAT-XT20 Reference Manual
109