C
ONNECTIONS
ADAT XT20 Reference Manual
•
Digitally bounce one of the stereo tracks to the other ADAT so
that both sides play back from the same machine.
•
Most importantly, it is better to plan recording sessions so that
stereo tracks reside on the same physical tape in a multiple ADAT
system.
If you are replacing one or more of your ADATs with XT20s and have
been using the short, 8" sync cables, you will need to use 1 meter cables
(or longer) to make the connection between ADATs and XT20s. This is
because the [SYNC IN] and [SYNC OUT] connectors have been moved
on the XT20 rear panel to the opposite side, and the shorter cables will
no longer reach.
Multiple ADAT-XT20 Operation: Chapter 5
103