ADAT XT20 Reference Manual
•
A digital source track cannot be selected as a digital
destination track (i.e. digital source tracks will not be allowed to be
record enabled when Track Copy is enabled).
•
If no source tracks are selected, you will not be able to place any
tracks into record-ready. If user attempt to record enable a track, the
track will not be enabled (REC LED will not light) and "noSovrcE"
will be temporarily displayed in the TIME counter.
When Track Copy mode is enabled (TRK COPY icon lit), the
•
All Input Monitor will not function. If the All Input Monitor is on when
Track Copy is enabled, it will automatically be turned off (ALL icon in
the INPUT MON icon group will turn off). See the next page for more
information about the All Input Monitor.
•
Any track delays that you have programmed will be in effect.
Basic Operations: Chapter 4
59