Using The Xt20 Lrc Remote - Alesis ADAT-XT20 Reference Manual

20-bit digital audio recorder
Table of Contents

Advertisement

Chapter 4: Basic Operations
U
SING THE
The XT20 hand-held LRC remote provides the following functions:
and Auto Loop
All buttons function as if pressed from the XT20's front panel.
The [AUTO LOOP] button, which does not exist on the XT20 front panel,
toggles both Auto Play and Auto Return functions on and off simultaneously
with one button press.
Note: If you wish to enable the Auto Play function without the Auto Return
function being enabled (i.e. without looping), you can initiate a deferred play
with the Play button — that is, press any of the [LOCATE 1] – [LOCATE 4]
buttons followed by the [PLAY] button.
To use the XT20 Remote, plug it into the [LOCATE/PLAY/LRC] jack or the
[PUNCH IN/OUT] jack, depending on which one is not being used. If connected
to the master XT20 in a multiple ADAT system, the XT20 Remote can control
the entire chain of ADATs.
If using a normally open footswitch, the footswitch and remote control can be
interchanged, or used simultaneously with a Y-cord, without restarting the
XT20 (powering down and powering up). However, if using a normally closed
footswitch, the XT20 should be restarted after switching from footswitch to
remote control or vice-versa.
86
XT20 LRC R
Transport functions: Rewind, Fast Forward, Stop, Play and Record.
Autolocation functions: Locate 1, Locate 2, Locate 3, Locate 4, Set Locate
Track functions: Auto Record and Rehearse.
EMOTE
ADAT XT20 Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Adat xt20

Table of Contents