Akai MPC 5000 Reference Manual page 96

played with changing the Level or the Pan as you did during the recording. The mixing data recorded in the sequence is displayed in STEP EDIT
page and you can edit it same as other MIDI event.
„
„
The INPUT page will be displayed.
You can also get to the INPUT page by pressing the [F4] (INPUT) button in MIXER mode.
You can also set DIGITAL here to be able to listen to digital S/PDIF sources.
If you select ANALOG in the 'Source' field, adjust the [REC GAIN] volume with using the level meter in the RECORD mode in advance. If you
select DIGITAL in the 'Source' field, the [REC GAIN] volume is not used.
Be sure to select an Effects Buss which has effects assigned.
This controls how much signal from the Input Thru source is sent to the Effects Buss. For a wetter effects signal, turn this parameter up.
You can also route the Input Thru source to one of the 8 individual outputs, in stereo pairs, or mono.