Akai MPC 5000 Reference Manual page 120

In the example shown, the sample DJ_RUBS is displayed in the first sample field.
You can select any sample currently stored in the MPC5000's RAM by turning the [DATA] wheel. You can assign samples by selecting '2' through
'4' fields. If you assign samples to '2' through '4' fields, you can play several samples at once.
For more information on loading and saving samples, see "Saving a Sample" on page 150.
„
The pad number display in the left of the screen will change according to the pad that
you hit.
The PLAY MODE window will be displayed.
The MPC5000 plays the sample until the end regardless of how long you hold the pad.
The MPC5000 plays the sample only while you hold the pad.
„
The pad number display in the left of the screen will change according to the pad
you hit.
You can audition the level changes by hitting the pad as you set the level.
The 'Tune' field has two fields divided by a decimal point.
The 2 digits on the left set tuning by semitones.
The 2 digits on the right change the tuning by cents (100 cents = 1 semitone).
You can audition the tune changes by hitting the pad as you adjust the pitch.
„
The pad number display in the left of the screen will change according to the pad
you hit.
The Amp Envelope window will be displayed.