The effected sound will play from the [STEREO OUT].
This will display the EFFECT EDIT window.
This brings you back to the EFFECT EDIT window.
The following selections are available
The dry signal of the source is sent to the output along with the effect
The dry signal is not sent to the output. 100% of the source is sent to the effect.
For our example, set this field to OFF.
This is a shortcut to take you into MIXER mode. You can also get to MIXER mode by Pressing the [MODE] and [PAD 8] (MIXER).
The PAD MIX page will be displayed.
This pad will be selected and its display will be highlighted.