Akai MPC 5000 Reference Manual page 119

„
This will enter PROGRAM mode.
The Program window will be displayed.
The New Program window will be displayed.
The name window will be displayed. Set the name for the new program and press the [F5] (ENTER) button. For more information about setting
the name, see the 'Setting Names' section on page 18.
This is a program that will contain samples. For more information on Synth programs see the section entitled 'Synth Programs' on page 115.
The new program will be created. The new program is 'empty', which means it does not have any samples assigned. To play the program, you
need to assign samples to the pads In the Sample page of PROGRAM mode.
„
When you press the [MODE] button, its LED will blink. When you press the [PAD 6]
with the [MODE] button's LED blinking, you will enter PROGRAM mode. Pressing
the [F1] (SAMPLE) button displays the SAMPLE page. The 'Pgm' field in the upper
left corner displays the name of the currently selected program. You can change the
selected program in the 'Pgm' field.
The pad number will be displayed in the left. The pad number will change according to the pad you hit.