Akai MPC 5000 Reference Manual page 92

The pad will be output in MONO to the corresponding [ASSIGNABLE MIX OUT] output.
„
In this display, each column indicates pad 1 though 16, starting from the left, and the currently selected pad is highlighted. The bar display on the
bottom indicates the current level. Longer bars indicate higher levels.
The column of the selected pad will be highlighted. You can select several pads by hitting pads while holding in the [SHIFT] button. You can also
select all pads in the PAD BANK by pressing a [PAD BANK] button while holding in the [SHIFT] button.
The fourth row down is labeled 'PAN'. Here is where the pan setting of individual pads are set. The knob graphic indicates the pan setting. The
location of the line within the circle indicates the current pan setting.
The bottom row is labeled 'LVL'. Here is where the level setting of individual pads is set. The dark line in each column represents the relative
level of each pad, much like faders on a mixing board. You can use the [CURSOR] buttons to move to each field in MIXER mode, and you can
adjust each level with the [DATA] wheel.
„
The PrgMix page will be displayed. Each column indicates pad 1 though 16 from the left to right, and the currently selected pad is highlighted.
The column of the selected pad will be highlighted.
To adjust this value: simply move the cursor to the FX row, and use the [DATA] wheel.
No effect will be used.