The display of the 'Pads' field depends on the type of the track that you have
selected.
By default, the field is set to ALL, which means the MPC5000 will edit all
the pads. If you wish to edit only a specific pad, position the cursor in
the 'Pads' field and hit the desired pad. The pad number will be
displayed in the 'Notes' field. You can select several pads. If you hit a
different pad by mistake, you can cancel the selection by hitting the pad
again. To restart the pad selection, turn the [DATA] wheel to the left.
The value in the 'Note' field will be reset to ALL so that you can select
the pad that you want from the beginning.
The display changes to show the selected region by note number.
You will set the upper limit and the lower limit of the note in the field,
The MPC5000 will edit only the events within the note numbers set in
this field.
The various fields necessary for the copying will be displayed.