Akai MPC 5000 Reference Manual page 46

Sets the 'MSB' (Control Change # 0) and 'LSB' (Control Change #32) of a MIDI Bank Select message from 0 to 127.
Selects whether a 'MIDI Program Change' message recorded in the track is transmitted or not.
Selects whether the sequence will send program changes whenever the sequence loops, or only on start.
„
„
„
„
The TRACK NAME window will be displayed as shown.
For more information for setting the name, see the 'Setting the name' section on
Page 18.
This closes the window and goes back to the MAIN page.
„
The TRACK NAME window will be displayed as shown.
For more information about setting the name, see the 'Setting the name' section on
Page 18.
This closes the window and goes back to the MAIN page.