Sample Program; Synth Programs - Akai MPC 5000 Reference Manual

The Function row will change as displayed on the right.
This will open the NAME EDIT window.
For more information about setting the name, see the 'Setting Names' section on page 18.
The new folder will be created in the selected directory. In the Directory window, the new folder is selected.
„
See page 149 for more information on selecting destination folders.
You can scroll through all samples in memory by turning the [DATA] wheel.
The MPC5000 starts saving the sample.
If the destination folder already has the data with the same name, the File Exists window will be displayed.
To cancel the operation, press [F4] (CANCEL).
To overwrite the data on the memory card with the new data, press the [F2] (REPLAC) button. The data in the memory card will be
replaced with the new data.
Pressing the [F5] (RENAME) button brings up the Name window, where you can change the name of the file you are about to save.
When you enter the name in the Name window and press the [F5] (ENTER) button, the MPC5000 will start to save the data.
„
See page 149 for more information on selecting destination folders.
You can select any program in memory by turning the [DATA] wheel.
If the program is a Synth Program, the program will be saved. If the program to be saved is a Sample Program, the SAVE A PROGRAM window
will be displayed.
You can choose whether or not to save the sample data (sounds) with the program data.
The MPC5000 will save the program data and the samples used for the program.
Normally you should select this option.
automatically.
The MPC5000 will save only the program data. It does not save the sample data. When you are sure that the samples
used for the program are in the selected folder, you can reduce the time to save the data by selecting this operation.
This determines how to handle files when the destination location already has a sample with the same name.
When you load the saved program, the MPC5000 will load the samples