The operation starts and the events of the selected pad within the selected area will be deleted.
Erase can also be used to delete events from tracks other than the currently selected track, or to delete only specific types of events. You can
also specify only a certain time range from which to delete events.
The Timing Correct window will be displayed as shown on the right.
For example, if you set '1/16', each position of the performance data will be moved
to the nearest 1/16 note.
You can set the Note values as follows.
This closes the window.
Timing Correct window will be displayed as above.
For example, if you set '1/16', each position of the performance data will be moved to the nearest 1/16 note.
You can set the Note values as follows: