Installing The Autosampler Module With The Column Selector Module - Teledyne AutoInjector Module Installation And Operation Manual

Figure 3-36 Inserting the power supply into the power
supply bracket
Figure 3-37 AutoSampler Module with power connection
made
3.2 Installing the
AutoSampler Module
with the Column
Selector Module
22. Plug the power supply into the respective port and then
connect the power supply to a suitable power source.
Using the AutoSampler Module in conjunction with the Column
Selector Module does not affect the installation process for either
module. Please install each module in accordance with the
instructions given in that module's section.
Section 3 The AutoSampler Module
Automation
3-19