Table of Contents
Advertisement
Parts Identification
ZRD-C12A/ZRD-C15A/ZRD-B12A/ZRD-B15A Display Cabinet
Left / Right
Caution
Do not connect the OUT and IN connectors to a
hub. The input/output signals for these
connectors are unique to the product and are not
Ethernet signals. In particular, be aware that
connecting these connectors to a PoE injector
hub may result in damage to the product.
Cabinet joints
Connect to other Display Cabinets.
There is one cabinet joint on the right side,
one on the left side, two on top, and two on
the bottom.
OUT (AC power output) connector
Use a power cord (not supplied) to connect
this connector to the IN (AC power input)
connector on the succeeding Display Cabinet
in the daisy-chain connection.
This connector is not used for the last Display
Cabinet in the daisy-chain connection.
IN (AC power input) connector
Use a power cord (not supplied) to connect
this connector to the OUT (AC power
output) connector on the preceding Display
Cabinet in the daisy-chain connection.
For the first Display Cabinet in the daisy-chain
connection, use a power cord (not supplied)
to connect this connector to the circuit
breaker.
OUT (cabinet output) connector (RJ-45)
Use a Category 7 cable (not supplied) to
connect this connector to the IN (cabinet
input) connector on the succeeding Display
Cabinet in the daisy-chain connection.
This connector is not used for the last Display
Cabinet in the daisy-chain connection.
7
Advertisement
Table of Contents
